 |
|
| Gyproc System |
WALL SYSTEM |
|
|
|
GypWall™ System
 |
|
|
Partitions using lightweight metal sections (C-Stud and U-Track), with Gyproc™ Plasterboard screw fixed on each side.
Properties and advantages: |
|
|
 Lightweight - only 18 kg/m2.
Multi-widths of metal sections enabling multi-applications at job sites.
Facilitating the incorporation of services.
Providing ½ - 2 hrs fire resistance.
Easy to install and renovate. |
|
|
GypLyner™ System
 |
|
|
Lining Wall on backgrounds using galvanized metal frame Gyproc™ ML 50A with Gyproc™ plasterboard screw fixed for smooth wall surface and also providing heat and sound insulation properties.
Properties and advantages: |
|
|
Lightweight – only 10 kg/ m2.
Quick and easy to install, whilst durable.
Facilitating the incorporation of services.
Able to use over all types of background with no need to
remove imperfections of the original background.
|
|
|
DriLyner™ System
 |
|
|
Lining walls using Prostick™ Dri-Wall Adhesive dabs to bond Gyproc™ plasterboard directly to the walls, the fastest way to refurbish existing walls
Properties and advantages: |
|
|
Excellent external heat insulation performance.
Occupying minimal space. Only 25 mm thickness of cavity
after system installed (standard installation).
Correcting irregularities on backgrounds or imperfections from
cracking or uneven surfaces.
Quick and easy to install, whilst durable and economical.
|
|
|
ProPlaster™ One Coat System
 |
|
|
ProPlaster™ One Coat is a "non-cracking plastering system" to replace conventional sand and cement surface finishes. Good for plastering on a wide variety of internal solid background types including concrete,brick,blockwork and lightweight concrete block.It can be applied from 5-50 mm thick.
|
|
|
Properties and advantages: Replace conventional sand and cement plastering.
Providing smooth,high quality and durable surface.
Excellent adhesion to wall surface.
Correcting irregularities on backgrounds or imperfections fromcracking or uneven surfaces.
Excellent external heat insulation property.
Easy preparation by only mixing with clean water, no need to wet background before applying.
Applicable up to 5 cm thickness in layer coating
Lightweight,fast and easy to work with.70% faster thansand and cement.
Providing excellent background for painting or wall paper decoration.
Health andenvironmentally friendly.
|
|
|
ProPlaster™ Wall Finish System
|
|
|
Finish coat system for internal application. Lightly apply with approx. thickness 3-5mm on any background, especially sand&cement or One Coat background for extra-smooth surface.
Properties and advantages: |
|
|
Quick and easy to work with.
Easy preparation by only mixing with clean water.
Correcting irregularities on backgrounds or imperfections
from cracking or uneven surfaces.
Providing extra-smooth and seamless surface ready for decoration.
|
|
|
| |
|
|
|
|
|
|
|
|
Wall Systems
Good understanding of the required wall system properties and subsequent selection of proper types of gypsum wall systems will greatly help reduce the construction cost and time. Therefore, Thai Gyproc has produced and developed a wide range of gypsum wall systems to serve various application requirements. Gypsum wall systems can be classified according to their applications for all sections of interior walls as follows:
Gypsum wall systems are non-load bearing and suitable for building interior applications. They can be used in all types of buildings and can be designed to meet the most demanding requirements for fire resistance, sound insulation, strength, robustness and also provide heat insulation property.
Gypsum wall for area partitioning
GypWall™ System
GypWall™ ROBUST
Gypsum wall systems for wall linings
GypLyner™ System
DriLyner™ System
ProPlaster™ One Coat System
ProPlaster™ Wall Finish System
|
|
|
|
|
|
|
|
ภาษาไทย
